1.1. Can't find the frame grabber during use? 1.2. Hardware drawings to obtain? 1.3. Does the company currently require capture cards for all series of light field cameras? 1.4. What configuration is required to use a light field camera? 1.5. Is the camera wired? 1.6. What are the precautions for the use of light field cameras?

1.1. Does the VA6/VE5 camera open normally and adjust the exposure time gain have no obvious effect? 1.2. Camera failed to open/Camera successfully opened, but video stream failed to open. 1.3. When using VOMMA software, the video stream opens and is not displayed on the interface. 1.4. Does the camera video stream have black lines, faults and other incomplete pictures as shown below? 1.5. The camera capture card and camera are connected, but the camera cannot be searched? 1.6. When the capture card is opened on a VA2/VE3 camera, gd2500m-30 (slave) USB2 mode! Is displayed. ?

2.1. Can't adjust render parameters to save? 2.2. How does depth of field relate to physical distance? 2.3. How do the multi-view coordinates correspond? 2.4. Modified multi-view does not take effect? 2.5. What does internal recovery mean? 2.6. No open button after closing an interface? 2.7. Will there be anomalies such as streaks, misalignments, light and shade changes when viewing multiple angles in rendering software? 2.8. Depth map interface measurement of two plane segment difference Can't choose two faces? 2.9. Newly installed rendering software Import project Found whiteboard cannot be viewed? 2.10. Inaccurate ranging function data? 2.11. VA2/VE3 camera temperature display abnormal? 2.12. Whiteboard shooting failed 2.13. The software runs normally and the camera is opened normally. When the camera is calibrated and shooting, the message "Shooting failed" is displayed with error code "14". 2.14. Camera calibration failure error code corresponding meaning 2.15. Software flash crash? 2.16. 3D flash function, use the pen to pull the image very close, the image will disappear (jump out of the screen) can not be dragged back; 2.17. Depth maps will be distorted, there are obvious errors, in multi-view, reference view, multi-focus, there are obvious results that do not belong to the sample. 2.18. Reference view, multi-focus, 3D point cloud image are pure white, depth map is the lowest color solid color? 2.19. Does the whiteboard respond before the new project is imported? 2.20. Where can I find the saved data location? 2.21. Why are some points missing from point clouds and depth maps? 2.22. Failed to save the 3D point cloud when saving the file? 2.23. Save the image data and the meaning of the corresponding error code. 2.24. How to save the result data? 2.25. Do not connect the camera to open the previous project, calibration whiteboard is complete, import the original drawing can not calculate the data? 2.26. After the new project, the camera is opened normally, the camera view has a video stream, and the data can not be calculated by taking photos. 2.27. Double-click the software, and a message is displayed, 2.28. Internal recovery parameters cannot be saved？

3.1. Save data exception? 3.2. The sample height is much smaller than the depth of field, how to make the color of the sample depth map more obvious? 3.3. How to tell if it is level? 3.4. How do you get real depth from that color depth map? 3.5. How are the output point clouds arranged? What is the correspondence between point clouds and multi-view graphs? 3.6. Software pop-up fusion failed interface? 3.7. Is the number of multi-view images set and saved inconsistent?

1.1. How to determine whether the operator is OK or NG in VisionHUB output settings? 1.2. Failed to initialize using software matching positioning, change parameters, software stuck? 1.3. Does the software support multiple cameras? 1.4. Does the software support opening multiple cameras?